Baptistry Heaters Home

Immersion Heater (120 and 240 Volt)
	Perfect solution for use in a portable baptistry or existing baptistry where a circulation heater is not an option. Available in 120 and 240 Volt Single Phase Immersion section of unit made of Incoloy or Stainless Steel. All heat confined to the formed horizontal section for optimum heat efficiency. Cold riser extends to the top of container where control housing is located. 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge. Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°). Hi-Limit cut out switch set at 125°F (±4°). Stainless steel mounting bracket also supplied for easy mounting. Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - Saves money. The 240 Volt heater will heat 60 GPH (40° R). A 750 to 1,000 gallon Baptistry can be heated in 13 to 17 hours, or one-half this time 20 degree rise in temperature. The 120 Volt heater will heat 20 GPH (40° R). A 100 to 200 gallon baptistry can be heated in 5 to 10 hours, or one half this time for 20° rise in temperature.

PBH Mini Baptistry Heater
	This baptistry heater is recommended for portable baptistries. 120V 15' power cord with a GFCI for your protection completely assembled pump and heater and includes: suction and discharge fittings and the on off button. Simply mount the base down in the desired location, plumb the unit to your tank and plug it in. built-in thermostat will maintain constant temperature. will raise 200 gallons of water @ 3 degrees per hour

PBH 5.5 Baptistry Heater
	This baptistry heater is recommended for baptistries of 700 gallons or less. Voltage: Pump 120v / Heater 240v Amperage: 30 Watts: 5,500 Recommended Wire Size: 10 gauge Pump Motor: 3/4 hp Pump Type: Centrifugal Plumbing Size: 1.5" PVC Rate of rise: 500 gallons from 70°F to 90°F in 7 hours Maximum distance from pump to baptistry - 50 plumbing feet GFCI Protected: NO Heating Indicator Light: YES Pump higher than water level: NO

PBH 10 Baptistry Heater
	This baptistry heater is recommeded for baptistries of 700 gallons or more. Voltage: Pump 120v / Heater 240v Amperage: 30 Watts: 10,000 Recommended Wire Size: 10 gauge Pump Motor: 3/4 hp Pump Type: Centrifugal Plumbing Size: 1.5" PVC Rate of rise: 500 gallons from 70°F to 90°F in 4 hours Maximum distance from pump to baptistry - 75 plumbing feet GFCI Protected: NO Heating Indicator Light: YES Pump higher than water level: NO

Need Info on a new baptistry click Here.